|
| |
|
|
Creation of Logistic Concept in the Selected Company
Kapusta, Vladimír ; Lahučký, Martin (referee) ; Jurová, Marie (advisor)
Master thesis named „Creation of logistic concept in the selected company“ is focused on detailed analysis of material flow of waste in manufacturing company. The main objective of thesis is proposal of new logistic concept of handling with copper waste, which is created during the manufacturing processes, which function will be to remove defects in material flow, to shorten the handling time with copper waste and more accurate information flow, considering work safety, costs and time.
|
|
|
Proposal or the new layout of the "toolshop"
Varhaník, Matúš ; Zahradníček, Radim (referee) ; Strejček, Jan (advisor)
The aim of this work was creating the draft of stamping tool workshop layout. Our first task was to define the product range. Afterwards we were able to identify the technological and machinery equipment necessary for the execution of orders. The paper further discusses the need of human resources as well as the needs of the production, administrative and social areas. We propose possible technological solutions considering the range of production, the amount of machinery and personnel capacities. The next step is to optimize the layout, using tools such as material flow and continuity of operations. Not only safety at work but also the ergonomics of the proposed workplace is important for the final draft. The result of our project is to develop the final layout of stamping tool workshop containing the economic evaluation of the investment plan.
|
|
|
Optimal layout proposal of technological workplaces at a small mechanical engineering company
Mohorko, Martin ; Dvořák, Milan (referee) ; Štroner, Marek (advisor)
This master´s thesis is focused on technological designing in a small company ENGITEC Motosport s.r.o. In first theoretical part of the thesis is this subject described in detail and analyzed in terms of economic and technical aspect. Next part describes the current state of the company and the production hall as well with keep on its current layout. In the following chapters is chosen piston-shaped component, which is manufactured by the company and three different variants of the piston production. Then one of them is selected, to which all related capacities calculations are made. In the final part of the thesis is proposed the relevant final layout of the hall and there is also the technical-economic evaluation of the most relevant variant included. Key words
|
|
|
Simple Window Manager for X Window System
Zajdák, Jiří ; Smrčka, Aleš (referee) ; Peringer, Petr (advisor)
Goal of the project is the creation of the simple window manager for X Window System. At first there are explained the principles of work of the graphic applications then the design of window manager and its implementation in the text. The window manager decorates the top-level windows of applications frames which contain functional buttons. For an easily operating are supported virtual screens and hot keys. The panel intended for graphic of plugins, which are implemented as shared libraries, is set in the bottom part of the screen The application place emphasis on minimal memory requirement.
|
|
|
A Client Application on Android Platform for the ITIL Simulator
Nechvátal, Petr ; Bartík, Vladimír (referee) ; Rychlý, Marek (advisor)
This Bachelors’s thesis presents design and implementation of a mobile application of website www.itiltrenazer.cz for Android. Created application allows users to solve and manage trainings and scenarios for practicing of selected methods of Information Technology Infrastructure Library (ITIL) with focus on design and service operation. The application can be used to practice ITIL standard or to learn proper methods for administering IT.
|
|
|
Optimizing the Production Process to Increase Productivity
Fonseca de Novak, Ingrid Zulay ; Jonáš, Jiří (referee) ; Jurová, Marie (advisor)
The diploma thesis deals with the optimization of the layout of the production line of the pre-assembly head in order to optimize the existing production process and its productivity. The theoretical part presents the theoretical knowledge gained by studying the literature focused on optimization of the workplace, lean manufacturing and project management. These findings are the basis for the analytical part, which describes the current state of the production line, including the analysis of the production process. In the following project part, a project for the optimization of the production line is developed.
|
|
|
NEW ON THE „OLD“ – Brno, Bratislavská - Stará Corner
Červinková, Kateřina ; Odvárka, Antonín (referee) ; Marek, Jiří (advisor)
The territory is located in the city of Brno -center , on the corner position Bratislavska streets and Stara. It consists of several parcels that are currently undeveloped , or the construction of a temporary nature on them. Part of the defined area is now used as a parking lot of the Police of the Czech Republic . From the historic center it divides traffic - a small city street circuit leading to fluctuate. In the vicinity of the area are mostly townhouses with shopping level , built between the 19th - 1st half . 20th century. On the street in Bratislava theater is Joy and Puppet Museum and on the street a few old buildings that are registered in the central register of cultural monuments of the country. The old and the Bratislava streets are typical of the gallery houses with courtyards previously served as business premises . Today, these small companies but totally overcrowded scale and most low companies in this area collapsed or are in a neglected state. The whole area lacks public greenery and foliage is the closest city to the hamlet of liberation, located behind the traffic circle . The concept is based on the position of parcels - on the corner . The idea was to create a peaceful place to live and space for relaxation and meetings. The proposal consists of four masses , to bind and penetrate each other. Each material has its own separate function . Low - on the corner - allows infantry input to a depth of plot and thus offers a view of the surrounding historic facade. Compositions containing residential buildings are raised on the ground floor and the entire floor becomes a public space offers the opportunity to stroll through the old streets of Bratislavská on the street greenery, which in this area is insufficient.
|
|
|
Design of CMOS integrated circuits
Nevrkla, Marek ; Bajer, Arnošt (referee) ; Musil, Vladislav (advisor)
This work deals with issues of design and simulation of analog CMOS integrated circuit. The general aim is to design transconductance amplifier working with low input offset voltage. The two stage operational – transconductance amplifier with compensation RC element is presented. Creation topography amplifier by the help of technology AMIS 07.
|
|
|
Proposal for the automation of the production line for the grinding of compressor part
Jirák, David ; Jakoubek, Jaroslav (referee) ; Kubík, Roman (advisor)
The topic of this diploma thesis was chosen by Valeo Compressor Europe Company. The aim is to propose an automation of the production line for grinding of a compressor part. The part is internally termed “Cylinder,” and it is an integral part of a new type of a rotational compressor for air-conditioning units of automobiles. The diploma thesis includes a complete proposal for the automation of workplace. The current state, the proposal of the concept, technical specification of the project, and the choice of a suitable supplier and economical assessment are included. The data were provided by Valeo Compressor Europe Company.
|
guest ::
